Englishen françaisfr Deutschde русскийru españoles portuguêspt 한국의ko Türkçetr Polskipl ไทยth

Give us a call

+8617720812054
other
Products
Home /

Lithium Battery Production Machine Line

/

Prismatic Cell Machine

/Air Tightness Tester for Laser Welding Results

Air Tightness Tester for Laser Welding Results

Wechat:17720812054

Whatsapp:+86 13174506016

Email:David@batterymaking.com

  • Item NO.:

    TMAX-YK-QMCS-230
  • Payment:

    L/C,T/T,Western Union, Paypal
  • Product Origin:

    China
  • Shipping Port:

    Xiamen
  • Lead Time:

    5 days
  • Certificate:

    CE ROHS Certificate
  • Product Detail

Air Tightness Tester for Laser Welding Results


1Instruction

It is used to detect the effect of laser welding and judge whether the battery after welding has holes 


 

 Workflow description:

Manually put in the battery, clamp and position the fixture, press down the measuring mechanism, vacuum and maintain the pressure, detect the discharge of helium, judge OK and ng, reset the measuring mechanism, loosen the fixture, and take out the battery.


2Basic parameters

1. 1. Configure power supply:

AC220V50Hz, Voltage fluctuation range+8%-8%Total power: 0.5KW

2. compressed air

0.4MPa0.6MPa,Barometric fluctuation ±1% (Clean air after water removal, oil-free, filtration and pressure stabilization)

3. Vacuum source≤-0.095 kg/cm2

4. Equipment specifications

4.1Total weightabout 0.5T

 

4.2 SizeL1m)*W0.8m)*H1.6m

4.3 Appearance color: except for the stainless steel part, the box color is computer gray.

5. Environmental requirements:

5.1 ambient temperature: 25 ± 5 ℃.

5.2 relative humidity: 30% ~ 75% RCH, which should ensure that the air on site is dry and unblocked without acid-base corrosion.

5.3 ground wire: protective grounding.


3Specification

1.work efficiency1ppm(34155)

2.Equipment failure rate≤0.5%

3.Test pressure10-100kpa

4.measurement accuracy±0.2%

5.resolving power1pa

6.Insulation class A grade

7.Enclosure protection grade: Grade 6


4Process performance

1.Applicable battery size: height 120-225mmW 100-180mmT 20-60mm

2. Applicable battery model of fixture: see the attached drawing

3. There shall be no air leakage during the inspection of the tested mold and battery liquid injection hole

4. The equipment is equipped with a safety light curtain alarm

5. NG products have alarm prompt and counting functions

6. When the probe is lowered, it needs to avoid the pole. The probe uses a guide rod with a diameter of 8 to install a custom seal ring to avoid the battery pole.

7. Adopt pneumatic sealing fixture, and push the electric core by the air cylinder to make the liquid injection hole of the electric core closely fit the interface of the leak detector to form a closed circuit;

8. Support positive pressure leak detection and negative pressure leak detection; Automatically track the background and provide fast and reliable measurement results

9. The optimized mass spectrometry system and intelligent algorithm ensure rapid response in all ranges, and the highly reliable vacuum system and mass spectrometry system ensure rapid helium removal

10. It supports nitrogen air breaking, is not disturbed by environmental ammonia, and quickly reduces the background. The excellent performance of the machine supports 7 * 24 hours of long-time online testing

11. The excellent performance of the machine supports high rate tests every few seconds

12. Equipped with leak detection port fine filter to filter fine impurities, so as to ensure that the machine is not affected and damaged by impurities; Double iridium wire ion source, effective system design, anti atmospheric impact

(leakage rate conversion)

 

 

5Configuration of main components

1Air tightness and insulation resistance detection mechanism

 

直线导轨:linear guide rail

真空接口:Vacuum interface

提升气缸:Lift cylinder

上腔:Upper chamber

工件:Workpiece

下腔:Inferior chamber

 

 

2、Core feeding mechanism

利用激光指示注液孔位置,放工件时注液孔与标定点重合

Use the laser to indicate the position of the liquid injection hole, and the liquid injection hole coincides with the calibration point when placing the workpiece

 

 

3、Cell positioning mechanism

The boss at the end of the battery is matched with the square counterbore in the lower cavity of the tooling (this matching requires good consistency)

电池端部凸台与工装下腔方形沉孔配合(此配合要求一致性要好)

 

6Main Spare Part

1.Configuration of main part

SN

Name

Brand

1

touch screen

Weilun / Xinjie

2

PLC

Panasonic / MITSUBISHI

3

Cylinder

AirTAC

4

Vacuum digital pressure gauge

SMC

5

guide

THK

6

Air switch, contactor

chint

 

2.Attached accessories

SN

Name

Specification

Qty

Recommended replacement cycle

1

Sealing rings

Cycle Ø4

10PCS

1month


 

              

   

204.jpg

203.jpg

Related Products
Priamatic Cell Machine
Automatic Layer By Layer Stacking Machine for Anode and Cathode Electrodes of Prismatic Cell

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Priamatic Cell Machine
3 in 1 Semi-automatic Battery Edge Trimming Ironing Folding Machine for Pouch Cell Cases

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Priamatic Cell Machine
5V30A 16 Channel Battery Tester Charging and Discharging Machine

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Priamatic Cell Machine
High-performance Fiber 1500W Laser Welding Machine

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Priamatic Cell Machine
Air Tightness Tester Air-leakage Test Machine with Touch Screen

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Priamatic Cell Machine
Automatic Double Servo High Speed Die Cutting Machine for Pouch Cell Electrode Sheet

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Priamatic Cell Machine
Automatic Lithium Battery Continuous Coating Machine for Pilot Scale Production Line

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Priamatic Cell Machine
Hot Rolling Press Calendering Machine for Battery Production Line

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Home

Products

about

contact